
LPC2104_2105_2106_7
NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 07 — 20 June 2008
26 of 41
NXP Semiconductors
LPC2104/2105/2106
Single-chip 32-bit microcontrollers
7.
Limiting values
[1]
a) This product includes circuitry specically designed for the protection of its internal devices from the damaging effects of excessive
static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maximum.
b) Parameters are valid over operating temperature range unless otherwise specied. All voltages are with respect to VSS unless
otherwise noted.
[2]
Internal rail.
[3]
External rail.
[4]
Including voltage on outputs in 3-state mode.
[5]
Only valid when the VDD(3V3) supply voltage is present.
[6]
Not to exceed 4.6 V.
[7]
Per supply pin.
[8]
The peak current is limited to 25 times the corresponding maximum current.
[9]
Per ground pin.
[10] Dependent on package type.
[11] Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 k
series resistor.
[12] Machine model: equivalent to discharging a 200 pF capacitor through a 0.75
H coil and a 10 series resistor.
Table 8.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
[1]Symbol
Parameter
Conditions
Min
Max
Unit
VDD(1V8)
supply voltage (1.8 V)
0.5
+2.5
V
VDD(3V3)
supply voltage (3.3 V)
0.5
+3.6
V
VI
input voltage
5 V tolerant I/O pins
0.5
+6.0
V
other I/O pins
0.5
VDD(3V3) + 0.5
V
IDD
supply current
100
mA
ISS
ground current
100
mA
Tstg
storage temperature
65
+150
°C
Ptot(pack)
total power dissipation (per
package)
based on package heat
transfer, not device power
consumption
-
1.5
W
Vesd
electrostatic discharge voltage
human body model
all pins
2000
+2000
V
machine model
all pins
200
+200
V